 | Reference guide for barrier guards with openings Users accept the risks and responsibilities of using this tool correctly, including the use of the parts applied to the applicable standards. LHS shall not be liable for injury or damage related to improper use. According to the flat bar pattern, the tool is fully extended and fully inserted into the protective opening. |
 | Safety distance ratio For finger and hand protection Known gap size (mm) and distance hazard (mm) Check minimum safety Distance from danger Maximum reached Permitted barrier openings Shall not be used to design safety systems Safety stop distance (mm) |
 | direction Meet or exceed the following applicable scope Known gap size (mm) distance danger (mm) North American standards ANSI B11 ANSI/PMMI B155.1 ANSI/RIA R15.06 OSHA 1910.217 SEMI S2 CSA Z142 CSA Z143 CSA Z144 |
 | Safe stop distance (in) International gotcha stick For routine protection of fingers and hands Open for 3 years According to ISO 13857 Known gap size (mm) and distance hazard (mm) Openings over 100 mm are not recommended Safety stop distance (mm) |
 | Safety distance ratio Meet or exceed the following Applicable standards ISO 13857 ANSI B65-1 ANSI / SPI B151 NR 12 Safety stop distance (mm) |
Lihong Safety Equipment Engineering (Shanghai) Co., Ltd.
E-Mail: info@lh-safety.com
Address: 581 Xiuchuan Road, Chuansha Town, Pudong New District, Shanghai
(Greenland East Coast International Plaza-Room A 313)
Copyright ? Lihong Safety Equipment Engineering (Shanghai) Co., Ltd. ICP19034341-1 Technical Support: lanjujing
